New OOM202 Medical Oxygen Sensor Maxtec MAX-12/MAX-16

Technical Specifications OOM202

Measurement range 0 % ... 100 % oxygen (at atmospheric pressure)

Nominal sensor lifetime ≥ 1 000 000 % volume oxygen hours

Output in ambient air 13 mV ... 16 mV

Electrical interface 3 pin (Molex® 22-11-1031)

Accuracy meets ISO 80601-2-55 requirements

Repeatability < 1 % volume O2 at constant temperature and pressure

Linearity error < 3 % relative

Response time < 12 s to 90 % of final value

Zero offset voltage < 200 µV in 100 % nitrogen, applied for 5 min

Cross interference meets ISO 80601-2-55 requirements

Influence of humidity -0.03 % rel. per % RH at 25 °C

Pressure range 0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2

)

Influence of pressure proportional to change in oxygen partial pressure

Influence of mechanical shock < 1 % relative after a fall from 1 m

Operating temperature 0 °C ... +50 °C

Temperature compensation built-in NTC compensation

Effect of temperature compensation (steady

state)

between +25 °C and +40 °C: 3 % relative error

between 0 °C and +50 °C: 8 % relative error

Operating humidity 0 % ... 99 % RH non-condensing

Long term output drift < 1 % volume oxygen per month

typically < -15 % relative over lifetime

Storage temperature -20 °C ... +50 °C

Recommended storage +5 °C … +15 °C

Recommended load ≥ 10 kOhms

Warm-up time < 30 minutes, after replacement of sensor

Weight approximately 28 grams

Part number 01-00-0047